Spesifikasi PT SARANA TEKNIK CONTINENTAL HEAT RESISTANCE CONVEYOR BELT
PT SARANA TEKNIK CONVEYOR BELT & CHAIN
>>>PLEASE CONTACT : SARANAGROUP@CBN.NET.ID
TEL 021 6519582
SUNTER - JAKARTA UTARA
Jual Heat Resistance Conveyor Belt CONTINENTAL
Case Profile
In Order To Fulfill The Request Of Heat Resistance, We Choosethe High Temperature Resistance Canvas As The Carcass With High Modulus, Lowshrinkage And High Breaking Tensile Strength. And EPDM Rubber Or Chlorinated Butyi Rubberwith Good High Temperature Resistance Performance Is Used As Cover Rubber. Meanwhile,We Also Mix Other High Temperature Resistance Materials Through Compositing Andvulcanizing During The Process. In This Way, We Not Only Solve The Shrinkageand Deformation Of The Fabric Core, But Also Avoid Poor Adhesion Between Layerscaused By High Degree Of Saturation Of Ethylene Propylene Rubber. The Belt Showsproperties Of Heat Resistance, Low Elongation, Light Weight And Longer Working Life, Etc.
Applications
N Cementindustry, Coking Industry, Metallurgic Industry, Steel Industry,Etc.
Two Circumstances Are Suggested To Be Considered Whenchoosing Proper Belts,
N Thedifferent Kinds And Sizes Of The Granules Of Carrying Materials Will Lead Todifferent Temperatures Of The Belt Surface. The Temperature Of The Surface Ofthe Belt Is Lower Than That Of The Materials As There Exist Gaps Among Lumps Ofcokes Or Iron Ores When Conveying, And The Gaps Lead To Air Convection.
N The Temperatures Between Carryingmaterials And The Belt Surface Almost Remain The Same Level When Materials Arein A Small Size Of Granules Or In Powder, Such As Cement, Aluminum, Cartonblack Etc. Choosing A Belt Under Such Circumstance, Not Only The Temperature Ofthe Carrying Materials Has To Be Known, But Also The Heated Status Of The Beltsurface Has To Be Learnt During The Practical Operation.
Heat Resistant Conveyor Belt Technical Data:
DIN 22102
Tensile Strength Min. MPA.
Ultimate Elongation Min. %
Abrasion Max. Mm3
Basic Material
Hardness
Temperature Range °C
Application
T1
12
400
200
SRR
60±5
- 10 To+120
Suitable For Carring Hot Loads Continiously At A Temperature Up To 120°C And For Short Time Up To 130°C
T2
15
400
200
SBR
60±5
- 10 To+150
Suitable For Carring Hot Loads Continiously At A Temperature Up To 150°C And For Short Time Up To 180°C
T3
12
400
200
EPDM
60±5
- 30 To+180
Suitable For Carring Hot Loads Continiously At A Temperature Up To 180°C And For Short Time Up To 220°C